1. Trang chủ
  2. Phát Wifi Cisco C9105AXI-S
Phát Wifi Cisco C9105AXI-S

Phát Wifi Cisco C9105AXI-S

Liên hệ
Thương hiệu CISCO

Chính sách bán hàng

  • Thùng gồm có: Sách hướng dẫn, phụ kiện
  • Bảo hành chính hãng: Sản phẩm bảo hành theo chính sách nhà sản xuất (xem điểm bảo hành)
  • Nhận hàng sau 1 tiếng khu vực Đà Nẵng, Tam Kỳ và 12 tiếng khu vực ngoài Đà Nẵng
  • Đổi sản phẩm lỗi miễn phí trong 7 ngày.
  • Miễn phí hướng dẫn kỹ thuật từ xa

Phát Wifi Cisco C9105AXI-S

C9105AXI-S Cisco Catalyst 9105AX Access Point, Indoor environments, with internal antennas, Wi-Fi 6, 2x2 MIMO with two spatial streams, and S regulatory domain

Thiết bị Wifi Cisco Catalyst 9105AX Access Point Indoor environments, with internal antennas

Part NumberC9105AXI-S
Software Catalyst 9105 AXI
● Cisco Unified Wireless Network Software Release 8.10.MR3 or later
● Cisco IOS® XE Software Release 17.3.1, or later
Supported wireless LAN controllers● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities● 2x2 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
802.11ac ● 2x2 downlink MU-MIMO with two spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80- MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
802.11ax ● 2x2 uplink/downlink MU-MIMO with two spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80- channels
● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
Integrated antenna Catalyst 9105AXI
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Interfaces Catalyst 9105AXI
● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
● Management console port (RJ-45)
Indicators ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions
(W x L x H)		● Access point (without mounting brackets):
◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)
Weight Cisco Catalyst 9105AXI
● 0.7 lb. (329.5g)
Input power requirements● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE®)
● Cisco power injector, AIR-PWRINJ6=
● 802.3af PoE
● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Environmental Cisco Catalyst 9105AXI
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
● Operating temperature: 32° to 122°F (0° to 50°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.(3000 m)
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio.
Available transmitpower settings (Max/Min)● 2.4 GHz
◦ 20 dBm (100 mW)
◦ -7 dBm (0.2 mW)		● 5 GHz
◦ 20 dBm (100 mW)
◦ -7 dBm (0.2 mW)